video
Pallet Racks Anti Collapse Mesh
59 anti collapse mesh 2
59 anti collapse mesh 3
59 anti collapse mesh 4
59 anti collapse mesh 5
1/2
<< /span>
>

Pallet Racks Anti Collapse Mesh

Pallet Racks Anti Collapse Mesh is a welded steel back mesh that stops cartons and pallets falling out of a racking bay. Made to your rack height and width, in galvanized or powder coated finish, and supplied with bolts for fixing to the racking uprights.

Product Description

 

Pallet Racks Anti Collapse Mesh is a welded steel mesh panel that closes off the back or the face of a racking bay so nothing can fall into the aisle. It is fitted to pallet racking and mezzanine floors alike, and because the grid is open it blocks neither light nor the sprinkler spray, which keeps the racking compliant with fire safety layouts.
The panels are used to retain small cartons and loose stock, and to stop pallets from tipping out of a bay where a beam is loaded incorrectly or a level is picked short.


Do you need anti-collapse mesh for your warehouse?
It depends on what and how you store. If goods sit on pallet racking or on high shelving such as a mezzanine floor and they are small enough to slip between the beams, we would recommend anti-collapse mesh for the racking.
Two types of anti-collapse back mesh are made for racking systems:
1. Rack Net: bolted straight to the frame or upright of the racking, in 50 x 50 mm, 100 x 100 mm or 100 x 50 mm mesh, cut to your racking size.
2. Anti-collapse back mesh with a 25 x 25 mm frame: available in a range of mesh openings and stand-off bracket depths, so the panel can be set away from the racking at the spacing you need.

Galvanized anti-collapse mesh panel with 25 x 25 mm frame and square wire grid

Key Benefits of Pallet Racks Anti Collapse Mesh

 

Preventing accidents: the mesh closes the gap between uprights, so nothing can be knocked or vibrated out of a bay into a walkway where staff are working.

Safety: it stops pallets and loose goods from falling through the racking, which is the whole purpose of fitting a back mesh to a pallet rack.

Protecting goods: retained stock stays on its level, so cartons are not crushed on the floor and split pallets do not have to be re-stacked.

Made to size: anti-collapse back mesh is produced to the exact height and width of your storage racks rather than cut down from a stock size.

Easy assembly: panels are bolted to the uprights or the frame with standard bolts, so they can be fitted to an existing racking run without any welding.

 

How Anti-Collapse Mesh Panels Are Made

 

Anti-collapse mesh panels stacked ready for packing after welding and surface finishing

 

FAQ

 

Q: What surface finishes do you offer for anti-collapse mesh?

A: Galvanized or powder coated, chosen against the humidity of the warehouse. Galvanized panels suit cold stores and damp sites, while powder coating is normally used where the panel has to match the racking colour.

Q: What is the difference between rack net and anti-collapse mesh?

A: Both stop goods falling out of a racking system, but they are engineered differently.
Rack net is the lighter option and is bolted straight to the racking with bolts and nuts. Anti-collapse mesh is built on a 25 x 25 mm frame, so it is stronger and can be set off the racking at whatever stand-off distance you need.

Q: What mesh opening sizes can you supply?

A: Common openings are 50 x 50 mm, 50 x 100 mm and 25 x 100 mm. Any of these can be adjusted to the grid you need, so a Pallet Racks Anti Collapse Mesh panel can be matched to the goods being stored.

 

Hot Tags: pallet racks anti collapse mesh, China pallet racks anti collapse mesh manufacturers, suppliers, factory, welded wire mesh partitions, wire mesh partitions, cladding insect mesh, anti collapse mesh for racking, pallet rack bay dividers, pallet rack shelf dividers

Send Inquiry

(0/10)

clearall