video
Pallet Racking Wire Mesh Dividers
60 wire mesh divider 2
60 wire mesh divider 3
60 wire mesh divider 4
60 wire mesh divider 5
1/2
<< /span>
>

Pallet Racking Wire Mesh Dividers

Pallet Racking Wire Mesh Dividers split a pallet bay into separate lanes so small items and tools cannot shift into each other. They are made to your shelf length and width in hanging or snap-in fixing, in galvanized or powder coated finish to suit the wire decking.

Product Description

 

Pallet Racking Wire Mesh Dividers are vertical wire partitions fitted across a pallet bay to split one pallet position into separate compartments. They stop small items, tools and cartons from shifting or sliding into each other, and they keep mixed stock straight on the shelf.
Dividers are made to size rather than taken from a stock list, in two fixing types. The hanging wire mesh divider carries a shaped hook that hangs over the wire decking and is secured at the top and bottom of the deck; the standard snap-in warehouse shelf dividers clip straight onto the wire decking instead.
Either type lets you divide a pallet bay into lanes, so a mixed pallet load can be organised and picked without hunting through the whole level.

Snap-in wire mesh divider being clipped onto galvanized wire decking over an orange pallet racking beam

 

How to Choose Pallet Racking Wire Mesh Dividers

 

1. Mesh size: the opening that suits the smallest item you need to hold back, from a tight grid for loose parts to a wider grid for cartons.
2. Material and strength: the wire diameter and frame section, which decide how much the divider can hold back without bowing.
3. Compatibility with wire mesh decking: the attachment method, so the divider can be clipped, bolted or welded to the wire decking or the rack frame without drilling new holes. This is what decides whether a racking divider can be added to a bay that is already in service.
4. Load requirements: the side load the divider has to resist, set by the weight and shape of the goods on the shelf.
5. Galvanized or powder coating, chosen against the humidity of the warehouse and the finish of the racking.

 

Packages

 

Pallet racking wire mesh dividers dividing a bay into lanes on a warehouse shelf

 

FAQ

 

Q: What surface finishes are available for the dividers?

A: Galvanized or powder coated. Galvanized dividers suit damp warehouses and cold stores, while powder coating is used where a pallet rack divider has to match the racking colour. Both finishes are also used on warehouse rack dividers in dry retail stores.

Q: What is the difference between a hanging wire mesh divider and a standard snap-in divider?

A: Both are made to your sizes. A pallet rack hanging dividers panel hooks over the decking and is secured at the bottom of the wire decking, so it carries more side load. The snap-in divider is locked to the wire decking with clips and is the quicker of the two to fit, but it is not as strong as a hanging divider.

Q: Can dividers be fitted to longspan shelving as well as pallet racking?

A: Yes. Pallet rack shelf dividers are sized from the length and width of the shelf, so the same panel types are used on pallet racking bays and on longspan shelving levels.

Q: Can the dividers be moved later if the layout changes?

A: Yes. Snap-in dividers can be unclipped and repositioned, and a hanging wire mesh divider can be re-hooked, so the lane widths of any pallet rack bay dividers can be changed without replacing the wire deck dividers underneath.

Q: How are the dividers packed for export?

A: Dividers are stacked on a pallet and secured with steel straps for export, the same packing used for wire decking panels.

 

Hot Tags: pallet racking wire mesh dividers, China pallet racking wire mesh dividers manufacturers, suppliers, factory, welded wire mesh partitions, wire mesh partitions, cladding insect mesh, anti collapse mesh for racking, pallet rack bay dividers, pallet rack shelf dividers

Send Inquiry

(0/10)

clearall