video
Pallet Racking Galvanized Wire Decking
58 wire deck 2
58 wire deck 3
58 wire deck 4
58 wire deck 5
1/2
<< /span>
>

Pallet Racking Galvanized Wire Decking

Galvanized wire decking for pallet racking keeps every level visible and lets air and sprinkler water pass through. Panels are made to your beam span in flared, U channel or inverted profile, hot-dip galvanized for cold stores and damp warehouses.

Product Description

 

Pallet Racking Galvanized Wire Decking is a mesh deck racking panel that sits on the beams of a pallet racking system and closes the gap between them. Unlike solid decking it stays visible, so an operator can read a pallet label without moving the load, and moisture cannot collect on the surface. The panel has to be held against the beam so it cannot shift, and because beam profiles differ, the support bar is matched to the racking: flared channel wire decking suits box beams, U channel insert decking suits the step beam of heavy duty pallet racking systems, and inverted decking suits longspan shelving. Every panel is made to the clear span of your own bay rather than taken from a stock list, which is why racking wire decks and racking mesh decks are quoted from the bay drawing.

 

Galvanized wire decking panel for pallet racking with flared channel support bars welded under the mesh

 

Why Use Galvanized Wire Decking on Pallet Racks

 

1. Visibility: the open grid lets an operator read pallet labels and inspect a load without moving it, and it also helps when picking from wire mesh pallet rack shelving or checking shelf decking positions.
2. Airflow: unlike a solid steel deck, galvanized wire decking lets air move through each level, which helps hold a consistent temperature in cold storage and keeps damp out of the bay.
3. Fire safety: in a fire, sprinkler water passes straight through the mesh and reaches the load on every level, instead of running off a closed deck and leaving the lower levels dry. This is why heavy duty welded wire mesh is preferred over a solid panel on high racks.
4. Service life: the zinc coating protects the wire at every cut end and weld, so galvanized wire decks keep their strength in damp or unheated warehouses.

 

Production process

 

Galvanized wire decking production showing panels stacked on pallets after welding and galvanizing

Wire decking inspection measuring panel width and wire diameter before shipment

 

FAQ

 

Q: What surface finishing is available for wire decking?

A: Panels are supplied hot-dip galvanized or powder coated. Galvanized is the usual choice where humidity or wash-down is a factor, and metal wire decking or steel wire decking in a painted finish is used mainly in dry indoor warehouses.

Q: What is the difference between wire decking and solid steel decking?

A: Wire decking is built from a wire grid welded to support bars, so it stays visible, allows airflow and lets sprinkler water through. Solid steel decking is closed and opaque, which hides the load and collects dust and moisture on the surface. In practice a wire mesh pallet rack shelving bay is lighter and quicker to change than one with steel mesh decking or heavy gauge steel mesh panels.

Q: For a pallet racking bay of L2700 x D900 mm, what size of wire decking should I choose?

A: For a bay of L2700 x D900 mm, three panels per layer gives a panel size of approximately L890 x D904 mm, which is the layout most buyers choose for wire pallet shelves.
Two panels per layer gives a panel size of approximately L1340 x D904 mm.

Q: Do you make flared support wire decking?

A: Yes. Flared support wire decking is what we also call flared wire decking, and it is the profile used on box beams. It is a heavier member than a plain waterfall decking support, so it carries more load across the same span.

 

Hot Tags: pallet racking galvanized wire decking, China pallet racking galvanized wire decking manufacturers, suppliers, factory, decking mesh, F channel wire decking, steel wire mesh decking, steel mesh decking, wire mesh for pallet racking, edsal wire deck

Send Inquiry

(0/10)

clearall