video
Insert Wire Mesh Deck
56 wire deck 2
56 wire deck 3
56 wire deck 4
56 wire deck 5
1/2
<< /span>
>

Insert Wire Mesh Deck

Insert Wire Mesh Deck is a drop-in welded wire panel for pallet racking and wide span shelving step beams. It fits 18 mm and 28 mm steps, with U channel or F channel support bars in galvanized or powder coated finish, built to your beam span.

Product Description

 

Insert Wire Mesh Deck is a drop-in welded wire panel for wire mesh decking for pallet racking and wide span storage racks wire decking, seating between the beams so goods rest on an evenly supported surface rather than on the beams alone.
For box beams, an F channel support wire deck is the usual choice, with the flared channel spreading load across the beam face.
For step beams, a U channel insert wire mesh deck locates inside the step, and an F channel deck can also be used where a wider bearing face is preferred.
Because the panel drops in rather than hooks over the beam, the full beam width stays clear for pallet entry.

Insert wire mesh deck seated between pallet racking beams with a wire mesh divider fitted on top

 

What Determines the Load Capacity of Wire Mesh Decking

 

1. Wire diameter and mesh opening: heavier wire carries more load per span, and a tighter grid spreads point loads better than a wide one. These two variables also set the available wire decking sizes.
2. U channel support bars: welded wire rack decking is carried by these primary load-bearing members, so the number of bars under a panel is the main factor in its load rating.
3. Beam type and span: the distance between beam centres sets the unsupported span, and panel fit matters too, because steel wire mesh decking that does not seat fully into the step or F channel will rock and concentrate stress at the edge wires in the deck racking.

 

How to Specify an Insert Wire Mesh Deck for Your Pallet Racking

 

  • Length: measure the clear distance between the two beams the panel will sit on, not the overall racking length, because racking deck boards and wire mesh decks pallet rack panels are cut to the clear span.
  • Width: match the panel to the beam-to-beam depth so the edge wires land fully inside the step or F channel, which matters most on decking shelves loaded from one side.
  • Beam type: confirm box beam or step beam first, because it decides whether an F channel or a U channel deck is required.
  • Step size: for longspan shelving, check whether the beam step is 18 mm or 28 mm, as the two are not interchangeable.
  • Load per level: give us the distributed load for the most heavily loaded level, whether this is a bulk storage rack wire decking bay or a hand-loaded shelf, so the number of support bars can be set correctly.
  • Finish and loading method: choose galvanized for cold stores and wash-down areas, or black wire mesh decking where a coloured finish is used to code storage zones, and tell us whether pallets are placed by forklift or by hand.

 

Inspection pictures

 

Wire mesh decking inspection showing stacked wire, welding fixture, caliper measurement and U channel reinforcement check

 

FAQ

 

Q: Do you sell the support bars for wire decking separately?

A: Yes. U channel, inverted channel and flared channel supports are all supplied as separate line items, so a damaged support can be replaced on its own.

Q: Can you customize an insert wire mesh deck for my pallet racking?

A: Yes. Send us the beam type, the clear span between beams and the depth, and we will build wire decking sizes to suit that bay rather than working from a stock list.

Q: Can a wire deck be used in a cold storage warehouse?

A: Yes. Hot-dip galvanized wire mesh decking is the standard choice for freezers and cold rooms, because the zinc coating protects the wire where condensation and wash-down would rust a painted finish.

Q: Can wire mesh rack decking support a plastic pallet?

A: Yes. A wire mesh pallet deck carries plastic and wooden pallets alike, and the open grid avoids the standing water that collects on a solid deck, which is why wire deck is common in food and pharma storage.

Q: Can you make wire decking in double depth or triple depth?

A: Yes. Double and triple depth decks are made to order; the largest we have produced is approximately 4 m for a triple depth bay.

Q: What material is the deck made from?

A: The wire and support channels are made from Q235 steel, which is then galvanized or powder coated.

Q: Do you make wire decking for a longspan shelving step beam?

A: Yes. We make wire decks for both 18 mm and 28 mm step beams, so tell us which profile your longspan shelving uses.

Q: What is the delivery time?

A: 20 to 30 days for pallet racking and wire decking, counted from confirmation of the drawings and sizes.

 

Hot Tags: insert wire mesh deck, China insert wire mesh deck manufacturers, suppliers, factory, decking mesh, F channel wire decking, steel wire mesh decking, steel mesh decking, wire mesh for pallet racking, edsal wire deck

Send Inquiry

(0/10)

clearall