video
Wire Decking F Channel Reinforced
57 wire deck 2
57 wire deck 3
57 wire deck 4
57 wire deck 5
1/2
<< /span>
>

Wire Decking F Channel Reinforced

Wire Decking F Channel Reinforced wire mesh decking uses flared channel support bars that sit over the beam face to spread load. Made from Q235 steel in galvanized or powder coated finish, with wire diameters from 4.0 mm to 6.0 mm.

Product Description

 

Wire Decking F Channel Reinforced is a steel rack decking panel whose flared channel support bars sit over the beam face and spread load across the full flange width. In a mesh racking system it can be used in two ways:
1. As the load-bearing deck, where pallet wire mesh decking rests directly on the beams and the flared channels carry the pallet weight between them.
2. As a safety back-up, where pallets sit on the beams and the wire mesh decking closes the gaps so items cannot slip or fall through the pallet racking wire mesh.
Either way the panel is galvanized or powder coated, and it is made to your own beam span rather than taken from a stock list.

Wire Decking F Channel Reinforced panels fitted across a multi-level warehouse pallet racking system

 

How to Specify an F Channel Wire Deck

 

Each point below is confirmed against your bay drawings before production, so the panel arrives ready to drop in:
1. Racking type: pallet racking or longspan shelving, because the two accept different support profiles.
2. Beam type: box beam or step beam, which decides whether a flared channel for waterfall wire deck locates correctly on the beam. This is the same rail profile used on rack wire mesh decking and on a wire deck for pallet racking.
3. Racking size: the clear length between beams and the beam-to-beam depth, which together set the wire deck for racks dimensions.
4. Depth: single depth, double depth or triple depth, which is common on warehouse racking wire decking runs.
5. Loading capacity: the distributed load per level, which sets the number of steel support bars under each panel.
6. Wire mesh grid: the opening size, chosen between a tight grid for small parts and a wider grid for airflow around the goods.
7. Wire thickness: the wire diameter, which sets both the pallet rack wire deck capacity and its resistance to impact.
8. Finish: galvanized or powder coating, chosen against the humidity of the storage environment.

 

Production pictures

 

F channel wire decking inspection showing wire diameter measurement, mesh check and packing before shipment

 

FAQ

 

Q: Can I customize the size of a wire decking panel?

A: Yes. Storage rack decking and shelf rack deck sizes are made to your warehouse layout, so send us the clear span between beams and the depth of the bay.

Q: Does the wire thickness affect capacity?

A: Yes. Thicker wire raises both the load a panel can carry and its resistance to impact, which matters most on wire decking for pallet racking bays loaded by forklift.

Q: What wire diameters do you make?

A: Standard wire diameters are 4.0 mm, 4.5 mm, 5.0 mm, 5.5 mm and 6.0 mm, chosen against the load per level and the wire mesh around deck required.

Q: What support bar profiles do you make?

A: Three profiles are available: U channel, inverted channel and flared channel. The flared channel is what makes an F channel wire decking panel, and it is also sold as waterfall wire deck.

Q: How is wire decking packed for export?

A: Panels are stacked on a pallet, wrapped in PE film and secured with steel straps for export.

Q: What material is the deck made from?

A: The wire and support bars are made from Q235 steel, then galvanized or powder coated. Panels are also used as wire mesh decking for shelves inside shelving bays.

 

Hot Tags: wire decking f channel reinforced, China wire decking f channel reinforced manufacturers, suppliers, factory, decking mesh, F channel wire decking, steel wire mesh decking, steel mesh decking, wire mesh for pallet racking, edsal wire deck

Send Inquiry

(0/10)

clearall