video
Drive in Racking Systems
11 drive in racking system 2
11 drive in racking system 3
11 drive in racking system 4
11 drive in racking system 5
1/2
<< /span>
>

Drive in Racking Systems

Drive in Racking Systems for bulk, uniform loads: the forklift drives into the rack, so a lane stores pallets several deep and aisle space becomes storage. Rated 800-1,200 kg per pallet, with the final figure set per project. Lane depth, height and steel grade follow your pallets and building.

Product Description

 

Drive in Racking Systems is a high-density storage method in which the forklift travels into the rack instead of picking from an open face. Pallets rest on rails fixed to the uprights, so one lane holds several pallets deep and the aisle a selective layout would use for access becomes usable floor. Stock moves last-in, first-out: the most recently loaded pallet is the one retrieved first, which is why a lane is normally dedicated to a single SKU. That makes drive in racking systems a fit for bulk loads - frozen goods, beverages and other uniform palletised stock - and they are widely used in cold stores, where every square metre of floor is expensive to cool and to rent. Because the truck travels inside the lane, a drive in warehouse racking layout turns aisle space into storage, and a site that needs more throughput per SKU can be laid out as drive through racking, loaded from one side and picked from the other. Lane depth, entry side and forklift model define the layout, so the system suits operations that can dedicate a lane to a single product.

Drive in pallet racking cutaway showing upright frames, top beams, pallet rails and guide rails

Material

High-quality Q235 cold rolled steel

Standard Color

Blue (RAL5015), Orange (RAL2004)

Pitch

75mm or 76.2mm

Surface Treatment

Powder spray or galvanized

Design Service

Free CAD design

Lead time

3-4 weeks

Trade Term

FOB / CNF / CIF

 

How we enhance the quality of Drive in Racking Systems?

 

1. High-tensile steel - Q235B or higher-grade steel is used for uprights and beams to raise load-bearing capacity and impact resistance.
2. Reinforced bracing and connections - horizontal bracing is added to limit lateral sway under forklift contact.
3. Corrosion protection - hot-dip galvanizing for outdoor or cold-store service, powder coating for indoor installations, to extend rack lifespan.
4. Forklift guidance - steel guide rails or floor markers keep trucks aligned when entering lanes and reduce impact damage to uprights.
5. Project documentation - every order is supplied with a design calculation and load table; certification is provided on request against the destination market's requirements.

 

Projects

 

Drive in racking aisle in a warehouse with impact protection posts
Drive in racking lanes viewed from the entry side of the rack
Drive in racking loaded with cartons on pallets

 

Production Process

 

Press shop forming rack components on JH21 presses
Roll forming line producing rack uprights from steel coil
Powder coating line with rack components on the conveyor

 

Package

 

Palletised rack components wrapped and stacked for shipment
Rack components packed and secured inside a shipping container
Rack components on pallets strapped and wrapped ready for export

 

FAQ

 

Q:What are the risks of overloading Drive-In Racks?

A: Structural failure, pallet collapse and safety hazards for forklift operators. Rated capacity must be respected lane by lane, not averaged across the rack.

Q:What is the maximum allowed rack deflection?

A: Typically 1/180 of the beam span or tighter; the governing limit depends on the local code and the client's specification.

Q:Are Drive-In Racks safe for forklift operations?

A: Yes. A drive in racking system is safe when it is installed plumb and level, loaded within its rated limits, and operated by trained staff using the designated entry side.

Q:What is the loading capacity for drive in racking?

A: Normally 800-1,200 kg per pallet. The final rating for a drive in racking system is set per project, so send us your pallet weight, beam span and level height for a confirmed figure.

Q:What is the standard height of Drive-In Racking?

A: Typically 2–10 meters, set by the building clear height and the forklift's lift and mast requirements.

Q:What is the maximum pallets deep of a Drive-In Racking lane?

A: Usually 4–10 pallets deep, depending on pallet footprint, load weight and the truck's reach into the lane.

 

Hot Tags: drive in racking systems, China drive in racking systems manufacturers, suppliers, factory, used Dexion pallet racks, heavy duty adjustable storage shelving, Teardrop pallet racking, drive in drive through racking system, warehouse pallet racking pallet racks, pallet rack beams

Send Inquiry

(0/10)

clearall