video
Drive in And Drive Through Pallet Racks
10 drive in pallet rack 2
10 drive in pallet rack 3
10 drive in pallet rack 4
10 drive in pallet rack 5
1/2
<< /span>
>

Drive in and Drive Through Pallet Racks

Drive in and drive through pallet racks: high-density pallet storage without aisles. Choose drive-in for last-in, first-out or drive-through for first-in, first-out rotation, with lanes 4-10 pallets deep and each pallet position rated 800-1,200 kg. Designed around your pallet, forklift and building height, with load tables issued per project.

Product Description

 

Drive in and drive through pallet racks store pallets in lanes rather than on open aisles, so a forklift enters the block instead of lifting across a rack face. Both variants use the same upright frames and rails: a drive-in lane is worked from one end for last-in, first-out, while a drive-through lane is open at both ends for first-in, first-out rotation. The system suits bulk pallet storage with a low number of SKUs, and a drive-in block fits around 40% more pallet positions into the same floor area than selective racking. Lanes are built 4–10 pallets deep and each pallet position is rated 800–1,200 kg, confirmed against beam span, beam section and level height for the project. Every set of drive in and drive through pallet racks is built around the pallet, the forklift and the building height.

 

Numbered diagram of drive in and drive through pallet racking components

 

Key Information for Drive In design

 

Pallet Type & Dimensions

Pallet L * W * H (mm)

Pallet Weight

Example 1,000 kg per pallet

Temperature

Ambient (15–30°C), chilled (0–5°C) or frozen (−18°C to −25°C)

Warehouse Layout

CAD drawing or dimensions

Available Ceiling Height

Example 6 m or 8 m clear

 

Why Choose Drive In and Drive Through Pallet Racks?

 

Bulk pallet storage is a layout decision before it is a steel order. Three points decide a drive-in project:
1. Capacity agreed before production. Each order is issued with a layout drawing and a load table, so lane depth, beam levels and the load carried on each rail are signed off before steel is cut.
2. Fitted to your pallet, not to a standard module. Upright spacing, rail height and entry clearance are taken from the pallet you actually ship and from the forklift that will work the block.
3. Quoted and supported as one installation. Frames, rails, guide rails, upright protectors and fixings are priced as a complete block, and replacement rails, guides, additional beam levels and longer lanes can be supplied against the original design.

 

Projects

 

Drive-in racking block with upright protectors, loaded with wrapped pallets
Empty drive-in racking lanes with guide rails and upright protectors
Drive-in lanes loaded with cartons on pallets for high-density bulk storage

 

Production Process

 

Punch presses forming uprights and rails in the racking press shop
Roll forming line and steel coil in the racking production shop
Powder coated racking beams hanging on the coating line

 

Package

 

Plastic pallets stacked for dispatch in the warehouse
Cartons wrapped and strapped inside a shipping container
Plastic crates stacked in the packing warehouse

 

FAQ

 

Q:How does Drive-In Racking differ from selective racking?

A:A drive-in block stores pallets in lanes inside the racking, so the forklift enters the structure and a pallet can only be reached through the lane. Selective racking keeps an aisle in front of every level, so any pallet is available directly. Drive-in trades that single-pallet access for a denser use of the same floor area.

Q:What is the difference between Drive-In and Drive-Thru Racking?

A:Drive-In works last-in, first-out, with the forklift entering the lane from one end only.
Drive-Thru works first-in, first-out, with the lane open at both ends.

Q:What is the role of bracing in Drive-In Racking?

A:Diagonal back bracing and horizontal top bracing hold the upright frames square and stop the block leaning under repeated forklift loading.

Q:What steel grade do you use?

A:Uprights and rails are cold-rolled Q235-B steel from BaoSteel, in the section sizes set by the load calculation for the project.

Q:Can drive in and drive through pallet racks be used in a freezer?

A:Yes. Freezer stores are one of the most common applications, and frames, rails and finish are specified for continuous low-temperature operation down to −25°C.

 

Hot Tags: drive in and drive through pallet racks, China drive in and drive through pallet racks manufacturers, suppliers, factory, used Dexion pallet racks, heavy duty adjustable storage shelving, Teardrop pallet racking, drive in drive through racking system, warehouse pallet racking pallet racks, pallet rack beams

Send Inquiry

(0/10)

clearall