
Industrial Wire Mesh Decking
Industrial Wire Mesh Decking is a welded steel panel that drops onto pallet racking beams and turns an open level into a load-bearing surface. In 5.0 mm wire with three or four support bars it carries a 1,000 kg UDL per panel. Galvanized for humid sites, powder coated indoors.
Industrial Wire Mesh Decking: Specifications, Load Ratings and Finish Options
Overview
Industrial Wire Mesh Decking is a welded steel wire panel that drops onto pallet racking beams and turns an open beam level into a continuous load-bearing surface. The panels in this range are built for industrial storage, with 5.0 mm wire, a 50 mm × 100 mm aperture and three or four flared support bars giving a 1,000 kg uniformly distributed load per panel.
Two finishes are produced: hot-dipped galvanized for humid, unheated and outdoor sites, and powder coated for dry indoor facilities where appearance and easy cleaning matter. Panels are made to order against your beam drawing, so non-standard widths, depths, apertures and wire diameters are available.
Key Specifications
|
Parameter |
Details |
|
Wire diameter |
5.0 mm (SWG 6 equivalent); 4.9 mm and 5.9 mm also produced |
|
Mesh aperture |
50 mm × 100 mm rectangular opening; small mesh also available |
|
Support bars |
3 bars on 900 mm deep panels, 4 bars on 1,100 mm deep panels |
|
Edge profile |
Flared / waterfall edge, or U-channel boxed edge |
|
Finish |
Hot-dipped galvanized, pre-galvanized, zinc plated or powder coated |
|
Load type |
Uniformly distributed load (UDL); point load rating is lower and span-dependent |
|
Beam compatibility |
Step beam, box beam, structural beam and C-channel - profile confirmed to your beam drawing |
Why Wire Mesh Decking
- Open mesh for sprinkler flow: unlike a solid deck, the open grid lets sprinkler water pass through to the levels below rather than ponding on the surface, so coverage is not blocked by the deck itself.
- Fall protection: the continuous surface stops small items, cartons and debris dropping between beam levels onto people and stock below.
- Airflow and light: the open grid improves circulation, which matters in cold storage, and lets light reach lower levels without extra rack lighting.
- Load capacity: built to carry a uniformly distributed load, with the rating set by wire diameter, aperture, support bar count and span for each configuration.
- Installation: supplied as drop-in wire decks with a flared edge for fast fitting, or with a U-channel boxed edge where a more rigid connection is needed.
Choosing the Right Finish: Galvanized vs. Powder Coated
The service environment usually decides the finish. A humid, unheated or outdoor site calls for galvanizing; a dry, customer-facing facility is usually better served by powder coating.
1. Galvanized Wire Decking
Best for: harsh, humid and outdoor environments.
The panels are coated in zinc for corrosion resistance. The rougher, spangled surface is a result of the coating process and is chosen for durability rather than appearance.
Ideal use cases:
- Cold storage and freezers: the coating withstands condensation and sub-zero temperatures without rusting.
- Food and beverage processing: resists moisture, cleaning chemicals and high-humidity washdown areas.
- Outdoor storage yards: suited to lumber yards and construction sites exposed to rain.
- Chemical warehouses: resistant to mild chemical vapours and corrosive atmospheres.
Key benefit: the longest service life in aggressive environments, with the lowest long-term maintenance cost.
Appearance: metallic silver with a characteristic spangle pattern.
2. Powder Coated Wire Decking
Best for: indoor, dry and customer-facing facilities.
An electrostatically applied dry powder is cured under heat to form a hard, smooth shell. Standard industrial grey and blue are held, and other colours can be matched to a RAL reference.
Ideal use cases:
- E-commerce fulfilment centres: a clean, uniform finish for pick modules where staff work close to the racks.
- Retail backrooms and showrooms: can be matched to branding colours and keeps the racking presentable to visiting clients.
- Pharmaceutical and electronics: the smooth surface does not trap dust and is easy to wipe down in climate-controlled rooms.
- Automotive parts storage: keeps components clean and resists grease build-up on the deck itself.
Key benefit: a smoother surface for sliding cartons, plus colour coding for zone management.
Appearance: smooth matt or semi-gloss in uniform colours.
Standard Panel Sizes
|
Mesh Type |
Mesh (mm) |
Wire Dia. (mm) |
Panel Size (mm) |
Support Bars |
UDL (kg) |
|
Wire Mesh Deck |
50 × 100 |
5.0 |
1,150 × 900 |
3 |
1,000 |
|
Wire Mesh Deck |
50 × 100 |
5.0 |
1,350 × 900 |
3 |
1,000 |
|
Wire Mesh Deck |
50 × 100 |
5.0 |
1,150 × 1,100 |
4 |
1,000 |
|
Wire Mesh Deck |
50 × 100 |
5.0 |
1,350 × 1,100 |
4 |
1,000 |
Panel size is given as beam width × rack depth. Other widths and depths, apertures and wire diameters are produced to order. Finishes are galvanized or powder coated.
Applications
The panel suits a wide range of industrial storage and handling environments. On bulk racking it is ordered as bulk rack wire mesh, and where a walk-on or raised level is needed as wire mesh platform decking. The edge detail is selected to suit the beam: universal flared channel and double waterfall wire decking for fast drop-in fitting, and U-channel wire decking, 3-channel wire decking and 4-channel heavy duty deck where a more rigid connection is required. Flat wire decking and flanged wire decking cover the same requirement on other beam profiles.
Beam type drives the specification. Structural beam wire mesh, box beam wire decking and tegular wire decking are produced to suit the profile the panel has to sit on. The finish is chosen for the environment: pre-galvanized wire mesh and hot-dipped galvanized decking for humid or outdoor sites, and zinc plated wire decking or powder coating for dry indoor facilities. Aperture and wire diameter are matched to the load - 50 mm x 100 mm mesh decking and small mesh wire decking for general pallet duty, and heavier 4.9 mm wire decking or 5.9 mm wire decking where the span or the load calls for more stiffness.
Installation and Care
- Fitting: a flared panel drops onto the beam and the bent wires hook the flange. Check the edge is fully seated at both ends before loading.
- Loading: keep loads evenly distributed. A point load concentrated in one spot reduces the capacity of the panel well below its UDL rating.
- Inspection: check for permanent deflection or forklift damage. A deformed edge reduces the grip on the beam and the panel should be replaced.
- Finish care: where the coating is cut or damaged in service, touch it up to keep corrosion from spreading.
FAQ
Request a Quotation
Tell us your beam dimensions, rack depth and the load you need to carry. We will come back with the panel size, wire diameter, mesh aperture, edge profile and finish that suit the level, plus a price.
Provide your beam dimensions and load requirements, and we will prepare a proposal for your racking.
Call Us: +8618250837639
Images



Hot Tags: industrial wire mesh decking, China industrial wire mesh decking manufacturers, suppliers, factory, decking mesh, F channel wire decking, steel wire mesh decking, steel mesh decking, wire mesh for pallet racking, edsal wire deck
Send Inquiry











