
Boltless Rivet Shelving Steel Panel Shelf
Boltless Rivet Shelving Steel Panel Shelf is a rivet-together system on 38 x 38 mm uprights with steel panel decks, assembled by rubber mallet without bolts. Levels adjust in 25.4 mm steps; heights 1,800 to 2,400 mm. Fits MDF, steel or wire decks. For garages, workshops and stockrooms.
Product Description
Boltless Rivet Shelving Steel Panel Shelf is a rivet-together boltless shelving system built on 38 x 38 mm slotted angle uprights and solid steel panel shelves, assembled with a rubber mallet and no bolts, nuts or welding. The rivet holes are pitched at 25.4 mm, so every shelf level can be raised or lowered in 25.4 mm steps without dismantling the unit, and the uprights are supplied in a range of heights to suit different room layouts.
Both single rivet shelving and double rivet shelving are available; most units we supply are double riveted for extra rigidity under load. The same boltless shelving system is used in garages, workshops, stockrooms, archives, retail back-of-house areas and light industrial picking zones.

There are different types of deck for boltless shelving used in different applications
All four deck options below fit the same upright frame, so the unit can be re-decked later if the goods stored on it change.
1. MDF panel / plywood deck: flat, quiet and low cost, used for retail displays, office supplies and boxed stock.
2. Steel panel deck: the heavier-duty option in this range, for tools, hardware and dense metal parts.
3. Laminated board deck: a sealed surface for boxed inventories and goods that must stay clean.
4. Wire mesh deck: an open surface for spare parts and electronics that lets light and air through.
Match the deck to the goods on the level: MDF and laminated decks suit boxed and bagged stock, steel panel decks take tools, hardware and dense metal parts, and wire mesh decks suit small parts and electronics. Deck choice changes the load rating, so settle it before ordering.
Why choose boltless shelving for garage, workshop and warehouse storage?
- Tool-free assembly - a rubber mallet is the only tool needed, and one bay goes up in minutes, so boltless garage shelving can be installed without an erector.
- Lower cost per bay - without bolted connections or welded frames the unit costs less than medium duty shelving while still carrying light loads reliably.
- Adjustable levels - shelf height moves up or down in 25.4 mm steps, so clearance can be matched to the goods on each level.
- Modular shelving - bays can be added side by side or stacked later using the same uprights and rivet system.
- Space saving - the uprights are light, so the unit can be moved and re-sited to use dead corner space in a garage or stockroom.
To specify a unit, send us the bay height, length and depth, the number of tiers, the deck type and the load you need per shelf. Standard heights, lengths and widths are listed in the FAQ below; other sizes are made to drawing, subject to a minimum order quantity.
Packages
Every set is supplied in one carton, packed flat for container loading: upright posts, panel shelves, top and bottom plastic caps and an assembly instruction sheet. Packing can be reinforced for long sea freight, and carton marking follows the buyer's own artwork.






FAQ
Whether you need a single garage boltless shelving unit or a full run of bays, send us the bay size, tier count, deck type and per-shelf load and we will quote the matching configuration. Every set ships in one carton with an assembly instruction sheet, and carton marking can follow your own artwork.
Hot Tags: boltless rivet shelving steel panel shelf, China boltless rivet shelving steel panel shelf manufacturers, suppliers, factory, uline boltless shelving, penco rivet shelving, used rivet shelving, rivet shelving accessories, heavy duty boltless shelving unit, single rivet shelving
Send Inquiry











