video
Cold Storage Heavy Duty Pallet Rack manufacturers
Cold Storage Heavy Duty Pallet Rack suppliers
Cold Storage Heavy Duty Pallet Rack factory
Cold Storage Heavy Duty Pallet Rack best
Cold Storage Heavy Duty Pallet Rack high quality
1/2
<< /span>
>

Cold Storage Heavy Duty Pallet Rack

Cold storage heavy duty pallet rack in Q235-B or Q345 cold-rolled steel, powder coated or hot-dip galvanized. Adjustable beams on 90x70 to 120x95 mm uprights, spans 1200 to 3600 mm, rated 500-2000 kg per pallet position UDL, with safety pins, wire mesh or steel decking, and column guards.

A cold storage heavy duty pallet rack is a selective pallet racking system for chilled and frozen warehouses, where low-temperature steel performance and corrosion resistance matter as much as the load rating.

Products Description

Cold storage heavy duty pallet rack is a selective system: perforated uprights and adjustable beams hold pallets in directly accessible positions, so any pallet can be picked without moving another.

The frame is Q235-B or Q345 cold-rolled steel, finished in powder coating or hot-dip galvanizing. Galvanizing suits cold stores, where condensation attacks a painted surface.

Uprights run in 90x70 to 120x95 mm profiles at 1.8 to 2.5 mm thickness; beams span 1200 to 3600 mm. The rating is 500-2000 kg per pallet position UDL.

Basic Info.

Product Name Cold Storage Heavy Duty Pallet Rack
Rack Type Selective pallet racking (pallet rack)
Material Q235-B / Q345 cold-rolled steel
Surface Treatment Powder coated / hot-dip galvanized
Upright Profile 90x70 / 100x70 / 120x95 mm
Upright Thickness 1.8 / 2.0 / 2.5 mm
Upright Height 2-11.8 m, or built to your clear height
Beam Specification 80x50 / 100x50 / 120x50 / 140x50 / 160x50 mm
Beam Length 1200 / 2400 / 3000 / 3600 mm
Beam Connector Safety pin, anti-disengagement
Beam Levels 4 levels as standard; re-slotted to suit pallet heights
Load Capacity 500-2000 kg per pallet position (UDL); final rating confirmed against span and level height
Decking Wire mesh or solid steel deck, matched to the beam range
Cold-Room Note Hot-dip galvanizing specified for chilled and frozen rooms

Safety and Installation Guidance

Beam ends lock into the upright so an upward knock cannot lift a beam out of its slot. Safety pins secure each connector, and column guards at the aisle entry absorb forklift impact that would otherwise deform a frame leg.

Pallets should sit squarely and centrally across the beam pair, never perched on one edge or overhanging into the aisle. Keep forklift traffic off the uprights, and treat aisle width as a limit set by the truck rather than by the rack.

In a cold store, check for bent or twisted uprights, loose or damaged beams, missing safety pins and missing fasteners on a scheduled basis. Frost and condensation hide early corrosion, so the inspection interval should be shorter than in an ambient warehouse.

Package

Selective pallet racking with blue uprights, orange beams and wire mesh decking in a warehouse

Close-up of an orange beam locking into a blue perforated upright with wire mesh decking above

Multi-level selective pallet racking with blue uprights, orange beams and mesh decking

 

FAQ

Q1: Are the sample available ?

A: Yes, sample sections can be supplied for evaluation.

Q2: Do you have technic support ?

A: Yes, our engineers review your layout and confirm the rack configuration before production.

Q3: What's your lead time ?

A: Lead time is confirmed once the layout, quantities and finish are fixed.

Hot Tags: cold storage heavy duty pallet rack, China cold storage heavy duty pallet rack manufacturers, suppliers, factory, industrial racking, pallet rack decking, heavy duty metal storage shelves, garage storage shelves, cold room shelving, adjustable fork pallet jack

Send Inquiry

(0/10)

clearall