video
Pallet Racking Column Guard
31 Pallet Racking Column Guard 2
31 Pallet Racking Column Guard 3
31 Pallet Racking Column Guard 4
31 Pallet Racking Column Guard 5
1/2
<< /span>
>

Pallet Racking Column Guard

Pallet Racking Column Guard is a steel pipe barrier, 76.2mm diameter, bolted around the base of an upright to take forklift impact before it reaches the frame. Single, double and triple-sided versions fit pallet racking, VNA and double deep runs.

Product Description

 

Pallet Racking Column Guard is a floor-mounted barrier that surrounds the base of a racking frame and takes the impact of a forklift before it reaches the upright. It is also supplied as pallet rack end guard, warehouse post protectors or pallet racking corner post protector depending on where it is fitted. Standard use covers pallet racking, VNA racking and double deep pallet racking, supplied single-sided, double-sided or triple-sided to match the aisle layout. Where a Pallet Racking Column Guard is fitted at a corner, the same unit doubles as a corner post protector.

Each guard is anchored to the slab through a base plate, so it can be installed with standard power tools and replaced as a single part if it is struck.

yellow pallet racking column guards in single, double and triple-sided styles

Feature

 

  • Material: steel pipe, 76.2mm diameter. The Pallet Racking Column Guard tube is powder coated in yellow or orange.
  • Supplied with the fittings needed for bolt-down installation, no welding required.
  • Available in different heights and widths for pallet racking, VNA and double deep frames.
  • Provides industry pallet racking standard protection at aisle ends.
  • Replaced as a single part when damaged, without touching the upright frame.

 

Racking guardrails are usually used in combination with the following facilities to form a multi-layer protection system:

Column base guards: protect the bottom-most columns, the area in direct contact with the ground and most exposed to forklift tyres.

Corner protectors: used at aisle ends where a pallet racking corner protector absorbs the sharper corner impact.

Reflective warning strips: applied to the guardrail face so forklift drivers keep a safe distance. Pallet Racking Column Guard units are delivered ready for this strip to be fitted on site.

 

Packages

 

orange pallet racking column guards wrapped and strapped on pallets for shipping

 

FAQ

 

Q: What's your material grade ?

A: We use rolling steel Q235-B for normal project .we also have Q345 steel for special projects.

Q: Can the guard height be adjusted on site?

A: The guard height is fixed by the upright section it covers; available heights are confirmed against your frame drawing before production.

Q: How are column guards packaged to prevent damage during shipping?

A: Guards are stacked on pallets with PE film, protective cardboard and steel strapping.
Special widths are confirmed before packing so the pallet stays stable.

Q: What colour is the pallet rack end guard?

A: Yellow, orange or a customized colour is available.

Q: Do you also supply a plastic upright protector?

A: Yes. Both steel and plastic upright protectors and end guards are available; the steel pallet racking end guard takes far higher impact loads than the plastic version.

 

Hot Tags: pallet racking column guard, China pallet racking column guard manufacturers, suppliers, factory, perforated metal decking, racking leg guards, pallet bumper guards, Column Protectors, heavy duty shelving, Column Protectors for Pallet Rack Upright Frames

Send Inquiry

(0/10)

clearall